Ink and Toner Q&A - Recent questions and answers

Answered: Do you take empty cartridges back?

Fri, 28 Jun 2024 21:56:12 +0000

No, we do not take empty cartridges back at this point of time.

Answered: What is the success ratio on your compatible/ remanufactured inks you sell?

Fri, 28 Jun 2024 21:40:22 +0000

We have almost 95% success ratio on our compatible/ remanufactured ink and toner cartridges we sell.

Answered: What is your refund/ warranty policy on your inks you sell?

Fri, 28 Jun 2024 21:36:47 +0000

We have 30 days refund policy and 365 days replacement warranty on our products we sell except any OEM (original equipped manufacturer) products.

Answered: Can Uni-Kit Printhead Suction System for all Brother Printheads compatible with LC203 ink printers?

Fri, 28 Jun 2024 21:16:45 +0000

Yes, it is compatible with LC203 ink cartridges and instructions are included with the purchase.

Answered: Alert- Epson latest Firmware Update ( Mar.2024 )

Tue, 05 Mar 2024 21:29:13 +0000

EPSON FIRMWARE UPDATE NOTICE

Important notice, Epson has released a new firmware update for T212XL, T222XL, T232XL, T812XL & T822XL disabling remanufactured cartridges. Once the end user updates the printer firmware, the remanufactured ink tanks with the old firmware chip will not work in certain printer models.

We recommend DISABLING PRINTER UPDATES on ALL PRINTERS, and to never agree to updates (automatic or otherwise) if you want to continue to be able to use lower cost 3rd party / remanufactured cartridges.

Answered: Why are some extra large ink cartridges now not broad and do they print the same number of pages as they should?

Thu, 31 Aug 2023 22:55:04 +0000

Even though some high-yield ink cartridges (Black) might not be broad in their size but they will print more pages as they are supposed to.

Answered: Are the cartridges refillable for -Canon imagePROGRAF iPF6400 Printer?

Sat, 01 Jul 2023 00:37:42 +0000

No, the cartridges for this printer cannot be refilled

Answered: Can HP DESKJET 2652 printer be worked with only single cartridge black or colour ink?

Tue, 28 Feb 2023 20:45:44 +0000

You can continue to print with one or more empty cartridges, but HP recommends replacing them as soon as possible to avoid printhead damage.

Answered: do you have HP 910 black cartridges

Tue, 31 Jan 2023 20:27:13 +0000

Yes we do have HP 910 and HP 910xl ink cartridges for black and for all colours offered with us.

Answered: The ink cartridge I received is not the exact size of the ones in my printer…63xl vs. hp63..

Mon, 31 Oct 2022 04:59:01 +0000

Per records you ordered HP63XL, Please double check and make sure you removed the covers before installing them.

For further assistance, Please Contact Here for Support

Answered: Universal Toner Refill Kit for HP Laserjet MFP M277dw ?

Thu, 25 Aug 2022 18:42:56 +0000

Toner kits are not available at the moment but we do have Toner cartridges both Original HP brand and compatibles available.

You can avail the discounts for this week on website by using COUPON - BTS22

Answered: Difference between Remanufactured and Compatible cartridges

Tue, 10 May 2022 22:58:05 +0000

A remanufactured product is a recycled OEM cartridge shell that's been cleaned and rebuilt whereas a compatible cartridge is built from scratch to fit into your printer just like the OEM version

Answered: Disable automatic updates > W2030A/W2030X AND CF259A/CF259X series printers

Thu, 14 Apr 2022 15:30:18 +0000

In general, we recommend DISABLING PRINTER UPDATES on ALL PRINTERS, and to never agree to updates (automatic or otherwise) if you want to continue to be able to use lower cost 3rd party / remanufactured cartridges.

To disable automatic updates for the W2030A/W2030X/ series printers -

1. Click Setup on the printer display (gear icon)

2. Click service

3. Click LaserJet Update, then click Manage Updates

4. Click on “automatic check” and set a check mark to “Off”, then repeat the process for the item “Allow updates”

For the CF259A/CF259X series printers:

1. Press the “OK” button and then the “Settings” tab

2. Click through the menu and press “Print Expectation”

3. Then press the menu item “Update firmware”

4. In the menu item “Update firmware” you will find the settings: “Update Settings” and “Allow updates.”

5. At both points set the check mark to “off”

Answered: What is the difference between "Remanufactured HP" and "Premium ink cartridge for HP"

Mon, 11 Apr 2022 13:24:20 +0000

Premium Cartridges are Made in USA whereas remanufactured cartridges are not.

Answered: Important notice on HP 258A/X, 414A/X and 206A/X toner cartridges.

Tue, 29 Mar 2022 16:40:16 +0000

Important notice on HP 258A/X, 414A/X and 206A/X toner cartridges! HP has released new firmware (Version 2208A) and induce consumers upgrade their firmware on March 16, 2022. Customers should disable such firmware update option immediately. The firmware update doesn't offer consumer any benefit but block third party toner cartridge to be used on their printer. The upgraded printers will prompt "Non-HP Chip Detected" or "Containing a non-HPchip" and fail to work. Error code: 10.00.46, 10.01.46, 10.03.46 or 10.02.46. Please click here to download the instruction to disable such firmware update

We are working on new chip and will inform you as soon as the new chip is ready. Please don't hesitate to contact us if you have any questions. thank you

Answered: How can i enable Single cartridge mode option in HP printer?

Fri, 25 Mar 2022 14:34:37 +0000

To print in single-cartridge mode, remove one of the ink cartridges, and then continue to print as usual. The printer control panel or computer screen might display a message to install the missing cartridge. To clear the message and continue with the print job, click or press OK.

Answered: Where is my refund?

Mon, 28 Feb 2022 21:23:13 +0000

Hello Charles,

We apologize for the inconvenince caused.

We were closed on saturday and sunday. We are in receipt of your approved request, your account will be refunded. Here's some information about refund confirmation transaction ID:

Refund confirmed (Transaction ID: 4A1289660T046952H, Refund Amount: $54.78)

Please allow 1-2 business days for the credit/refund to post to your account. After that time, please refer all inquiries to your card-issuing institution, as the time required to complete the refund may be affected by your institution's policies and practices.

If you have any further questions, please do not hesitate to contact us. Thank you for your patience and understanding, we appreciate your business and continue to strive to satisfy our customer's needs.

Sincerely,
Customer Care Team

Answered: Can I pick up an online order?

Mon, 28 Feb 2022 16:27:14 +0000

Walk-in's not available , Currently We can only ship.

Answered: Non-OEM Epson Cartridge errors- Causes and possible solutions to try

Wed, 16 Feb 2022 20:59:17 +0000

I would suggest to install one cartridge at a time and wait for the printer to read one and then install the other one after that. If any cartridge gives an error, skip that and try the other one to see if works. This way you will know if you get problems with any one or two cartridges or all.

Contact points -

>Make sure the cartridge chip is clean, free of ink smear and debris.
>Make sure the printer's contact pin is clean, free of ink smear and debris
>Verify that the cartridge is seated in the printer securely. Push it down hard until you hear a click. Once it is inside, wiggle it with your finger back and forth. If the cartridge seems to be loose, insert folded paper to the back and thus push the cartridge forward to have good contact with the printer.

Possible Causes:

>If you installed cartridge with power off, then printer won't know you changed the cartridge. It will confuse the printer and thus cause cartridge error.
>Sometimes Epson printer won't erase previous error code. When it has a depleted OEM cartridge error, and a non-OEM cartridge warning come together, it causes the printer to display "cartridge not recognized".

Things to try:

>Install non-OEM cartridge early. Do not wait till OEM cartridges empty.
>Put the OEM cartridge back and use on-screen prompt to change cartridges.
>Power off the printer and leave it about 1 hour then power it on
>Remove all cartridges. Let the printer run without any cartridge. It will create a "no cartridge installed" error and thus erase the "ink cartridge empty" error. After the printer settles down, use on-screen prompt to change cartridges.

It is recommended DISABLING PRINTER UPDATES on ALL PRINTERS, and to never agree to updates (automatic or otherwise) if you want to continue to be able to use lower cost 3rd party / remanufactured cartridges.

Answered: Recent Firmware updates (as of Dec 21) affecting HP 962 / HP 910 cartridges

Tue, 28 Dec 2021 03:50:52 +0000

As of Dec 21, we understand that HP has rolled out some firmware updates that do just that - on printers that accept the HP 962 cartridges. The same is expected to occur on printers that utilize the HP 910 cartridges. Below you will find video instruction links on how to DISABLE PRINTER UPDATES on the above models.

HP 962: IMPORTANT to disable updates to enjoy continued use of 3rd party carts
HP 910: IMPORTANT to disable updates to enjoy continued use of 3rd party carts

In general, we recommend DISABLING PRINTER UPDATES on ALL PRINTERS, and to never agree to updates (automatic or otherwise) if you want to continue to be able to use lower cost 3rd party / remanufactured cartridges.

Answered: i just placeds an orderon hour ago but deleted my e-mail is there any to get another one? help please

Mon, 06 Dec 2021 19:52:38 +0000

Please contact Customer Support via live chat/ email or call and you can ask for a copy of your order receipt to be sent to your email again.

Answered: Why the printer is showing ink is low but still printing fine?

Fri, 12 Nov 2021 17:54:15 +0000

This error occurs due to the chip on your cartridge still reporting a low or empty ink level from it's previous use. ... The chip itself cannot be reset, so when the cartridge is refilled and then installed into a new machine it will still register as empty.

Answered: These inkjet cartridge & there compatiblity

Tue, 09 Nov 2021 19:15:12 +0000

All these remanufactured cartridges comes with one year replacement warranty as per the website which I believe is good enough for a user to bring up any issues if they may face with them.

The Only thing you have to make sure is to NEVER update your printer's firmware which may then render the use of these cartridges and then the user will only have to buy OEM HP cartridges which are much costlier as you know...

Still Having said that it's always recommended to try these atleast once so you can compare them with the OEM cartridges and see the difference.

Answered: Can the CLI_8PC Canon cartridge(s) (i.e. #150 763-01), be subsequently refilled with kit ink?

Fri, 29 Oct 2021 22:08:18 +0000

For CLI-8PC ink cartridges you can refill the original Canon ink cartridges and they may require a new chip/ chip resetter to reset the cartridge after refilling. If not, you can otherwise buy the compatible ink cartridges which are ready to use ink cartridges.

Answered: How do i know which needs replacing, the toner or drum?

Thu, 30 Sep 2021 20:17:50 +0000

Well for that you will have to keep a check on the number of pages printed by both your Toner cartridge and drum. You can check with your seller or their website for the approx. page yield that you can expect from both. In general, a printer drum lasts about three or four times longer than your toner cartridges.

Answered: What are Jumbo toners?? Do all laser printers accept Jumbo toners?

Tue, 31 Aug 2021 23:19:49 +0000

Jumbo toners are the toners which can print almost double the page yield of any high-capacity toner cartridge for a few extra dollars only. There are some popular Jumbo toners available like Brother TN660 and Brother TN450 etc.

Answered: HP 902 / HP 952 / HP 972 CHIP UPDATE - coming Dec 1st, 2020

Thu, 19 Aug 2021 19:54:12 +0000

According to HP ( https://support.hp.com/ee-en/document/c06978431 )- Beginning Jan 20, 2021, HP 913A, 972A, 972X, 973X, 974A, 974X, 975A, 975X, and 976Y cartridges with Warranty Ends date of Sep 2021 or earlier might not be compatible with HP PageWide series printers listed on the link above.

Answered: I need to speak with customer service

Mon, 09 Aug 2021 15:26:32 +0000

We do have the cartridges for your printer. Please feel free to call or email us for a sales rep to assist you further with the current offers we are having.

Answered: If EPSON T038 AND T039 Cartridges are refillable?

Sat, 31 Jul 2021 00:09:29 +0000

It is hard to refill Epson cartridges and we do not have refill instructions for most of Epson printer cartridges.

Answered: What is the best way to dispose of used ink cartridges?

Mon, 19 Jul 2021 17:56:01 +0000

It is always advised to try and recycle-reuse the cartridges and avoid throwing them away that can help minimize waste.

There are different ways to recycle your used ink and toner cartridges. Here are a few suggestions:

Drop them off at your local office supply store.
Find a local recycling facility
Consider refilling your original brand ink cartridges

Answered: How to resolve Epson printer error code 1433??

Wed, 30 Jun 2021 20:20:34 +0000

Easy Steps to Resolve Epson Printer Error Code 1433:

Step 1: When Epson Printer error code occurs, firstly you have to disconnect all the USB cords.

Step 2: Now without switching off your printer, you have to remove all USB cables from your printer.

Step 3: After that remove all the ink cartridges.

Step 4: Remove all the paper from the tray.

Step 5: Now you have to leave your printer until your printer asks you to insert the cartridges.

Step 6: IF there is no notifcation on the printer screen then disconnect the power cable from the back of the printer.

Step 7: Now wait for 2 minutes and plug the power cable to the back of the printer.

Step 8: When you plug the power cable, then your printer will be on automatic.

Step 9: If the devices do not open automatically, then push the power button to switch on your printer.

Step 10: Now insert the cartridges inside the printer and close the door.

Step 11: Now you have to do a test print.

Step 12: Now you have to reconnect the USB cord from the rear side of the printer.

Step 13: Now take a print and everything should be fine.

Answered: How will I know when I need to replace the drum cartridge?

Mon, 21 Jun 2021 17:20:22 +0000

Replacing a Toner cartridge and Drum is both different but the symptoms are similar,with a little technical know-how and understanding what signs and symptoms to look for, you can rule out ink and toner problems and determine when printer drum replacement is necessary.

Blurry Prints

If your printer is churning out blurry pages, it either means that your printer drum is damaged and in need of replacement or that you need new ink toner. You can determine what the problem is by checking the toner cartridge.

Black Spots

Another common sign of a damaged printer drum is the presence of black spots or blotches on printed documents. This is often the result of a scratched or damaged printing drum surface, which prevents ink and toner from printing properly. If it's just dirt and dust that's present on the printer drum, wipe it off with a dry, lint-free cloth and resume printing to see if that fixes the problem. If problems persist, the drum likely needs to be replaced.

Poor Print Quality

If you're printer is churning out low-quality documents, it's likely the case of a damaged printer drum. Unlike blurry prints or black spots, poor print quality is characterized by faded text and images. However, this is another sign that is easily confused with empty ink and toner cartridges. After you check your ink cartridge levels and determine that they are adequate, check the printer drum. Drums are sensitive and don't last forever, so at some point it is likely you will need to replace it.

Other Signs and Symptoms

There are a variety of other signs and symptoms that point to a printer drum in need of replacement. The most obvious is most common on laser color printers and can be detected by a flashing message on the printer display screen. Other signs of a bad printer drum include printing blank pages, printing gray pages and strange sounds coming from the printer as it prints.

Answered: Epson > Stylus Pro 9900 > Error Code 1537

Tue, 15 Jun 2021 00:47:01 +0000

The 1537 error code indicates that the Ink System Pressure Sensor reports low pressure. for a cartridge(s) which leaks Pressure or the Pressure tubes/unit.

You can Test Ink Cartridges for pressure leaks with the Steps as follows

1. Place a tube on the Air Pressure Inlet for each Cartridge.

2. Blow gently into the tube to inflate the Cartridge.

3. A Cartridge with pressure leak will never fully inflate. A good Cartridge will stop accepting air, eventually.

Try this below

Please turn your printer off then back on after a minute. If it starts up and displays “READY” on the LCD panel, try making a test print. If you get the error message again, open both cartridge bay doors and check all your carts to make sure none are leaking, then reinstall and make sure the back of all carts are level with each other before closing the cartridge bay doors, and the printer should then read the chips and pressurize the carts. If the error returns, please check the carts by following the procedure below.

To determine which refillable cartridge is causing the pressurization problem, open the two cartridge bay doors, unlock and remove the set of refill carts, then install the set of OEM Epson carts

Put All Epson carts in
Take out left most Epson cart,Insert the Refilled cartridge in place
Close and wait and verify.(Each time close the ink bays the cartridges pressurize. Time how long the initial pressurization takes. The one that is a problem will take longer and will probably throw an error.)
Repeat the process with all the carts till you find the which is leaking.

You would have to replace the bad cartridge with a New one after you find the one which gives you the trouble.

Answered: How to maintain a Inkjet printer?

Thu, 27 May 2021 18:32:55 +0000

1. Never turn the machine off , let it go to sleep mode and save ink avoiding initiation and processing every time the machine is turned on. Try to use your printer at least two or three times a week. By doing so the print head will remain clear and there will be little chance of ink drying inside the print head resulting in poor print outs.

2. Use a good quality ink. We offering both Re-manufactured/Compatible inks and Premium Brand compatible inks - Made in USA.

3. Never run your ink cartridges until they are dry. This eventually will lead to your print head dying or at the least air being introduced into the print head resulting in low grade print outs.

4. Never remove an ink cartridge and rapidly shake it to check if it has ink inside. This is a common mistake which people make when their printer isn't printing correctly. By shaking an ink cartridge it simply aerates the ink and introduces air into the print head or the line which feeds the print head. This can be very difficult to remove.

5. Never do more than 5 print head cleans at the most. If your printer is not showing signs of improvement after this many cleans then you may need print-head cleaning Flush systems which you can buy from us.

6. Avoid printing only in black and white. Although inkjet printers still use the colors when printing in black and white it is highly recommended to print a color page every so often to keep the ink flowing freely from the print head.

7. Clean your printer out every so often with a vacuum or low pressure air gun. This may help prolong the life of the drive gear and the paper rollers. Also try cleaning the paper rollers every so often as this helps to prevent them becoming shiny and resulting in paper jam.

Answered: My Brother MFC-j497dw Cartridge "LC3013 acknowledges new cartrdg but has a Big "?" ovr color

Mon, 17 May 2021 15:46:21 +0000

Is it still printing with a "?" or is it not printing and not getting recognized ?

This might have caused due to cartridge not installed well or the chip on the cartridge might have gone bad for some reason.You can take the cartridge out and clean the chip of the cartridge with a lint free cloth and reinstall to see if that works otherwise you can check with your supplier and email them with your order details for help.

Answered: Can I use Epson Eco-Tank Ink in a Hp smart printer that uses HP60 Inkjet Carthage’s?

Mon, 17 May 2021 15:42:32 +0000

No, you cannot.

They are both different. You can check our website for Dura-firm dyebased ink refill kits which are made for all almost inkjet printers and would work great with your HP60 cartridges

Answered: How to reset TN850 toner cartridge if getting an error - Replace toner or toner life ends

Thu, 06 May 2021 18:40:08 +0000

1. Press the Home key on the right of the screen.
2. Press the Fax key on the screen.
3. With a piece of tape, mark where the “#” key is (or just “hover” your finger over it).
4. Press the Home key again.
5. Open the front door where the toner is.
6. Press and hold down the spot where the former “#” key was for about 8 seconds. The screen will now change.
7. Select the TNR-HC key on the screen.
8. The screen will change to Reset.
9. Press Yes.
10.Close the front door.
11.The machine should now recognize the new toner.

Answered: How to calculate page yield of a cartridge ?

Thu, 06 May 2021 18:38:15 +0000

All printer companies base their yields on 5% page coverage, or based on printer pages where on 5% of the page has been imprinted with ink. Suppose if a cartridge has a page yield of approximately 500 pages . With printer manufacturer standards, you should be able to print 500 pages at 5% page coverage, which is comparable to printing around 500 short paragraphs or any other details. 5% coverage is a baseline for comparison. If you are printing something more substantial like a legal document or a full-page color photo, your page yield will drop significantly

Answered: How to reset Brother TN660 Toner cartridges while getting a “Toner Low” or “Replace Toner” message.?

Thu, 08 Apr 2021 21:33:49 +0000

For the Brother DCP/MFC Series Printers (DCP-L2520DW, DCPL2540DW, MFC-L2680W, MFC-L2685DW, MFC-L2700DW, MFCL2705DW, MFC-L2707DW):

1. Press Menu.
2. Press the Up or Down arrow key to display the General Setup option, and then press OK.
3. Press the Up or Down arrow key to display the Replace Toner option, and then press OK.

4. Press the Up or Down arrow key to display the Continue or Stop option, and then press OK. 5. Press Stop/Exit.
For the Brother HL Series Printers (HL-L2300D, HL-L2305W, HLL2315DW, HL-L2320D, HL-L2340DW, HL-L2360DW, HLL2380DW):
1. Open front cover and leave it open.
2. Turn off printer.
3. Hold GO button while turning printer on.
4. After 3 seconds of printer being back on, release both buttons. (If you have a readout “User Mode” will appear, if you have no readout don’t worry)
5. Press Go button 9 times.

6. WiFi LED (if you have one) will flash once. (If you have no readout, go to next step.)

7. Press Go button 5 times.
8. Close the cover.
For the Brother MFC Laser Printers ( MFC-L2720DW, MFCL2740DW):
1. Open the front cover of your Brother MFC laser printer where you can access its toner cartridge.
2. Press and hold the Hash (#) button for about 5 seconds to see the toner menu on the screen. (The # key will be blacked out. If you are unsure where it is located press fax to find then press clear to perform the reset from your menu)
3. Select the toner you need to reset (For the TN630 choose STD for TN660 choose HC)

4. Select YES to reset.
5. Close the front cover.
6. DONE.

Answered: will starter cartridge chip from m404n work in hp58x without chip

Sat, 27 Mar 2021 00:10:54 +0000

Yes, It will work as the only purpose is to help your printer recognize the cartridge. you can buy a compatible cartridge and use the Chip from your original cartridge. compatible cartridge that comes without a chip.

You need to move the chip from your original (OEM) cartridge and place it onto compatible cartridge. This means that the printer will show "empty" or "0" toner supply due to the used chip, but the cartridge will still be able to print for the full life cycle and you can bypass the supply message that will popup by following the simple instructions included. Print yield or print quality will not be affected. Transferring the chip is easy to do and takes just a few seconds, instructions included, which will make it easy for you to move the chip from your original cartridge to the compatible cartridge. The chip can be re-used many times. Instructions on how to do this are also provided here: https://youtu.be/b-Bo22ou_70

Answered: Help with refilling HP 61XL black cartridges with Premium Universal Inkjet Refill Kit

Thu, 25 Mar 2021 23:07:59 +0000

Fold a piece of damp kitchen tissue (or any other non fibrous tissue) a couple of times and clean the printhead making sure there is no dried ink or dirt on the printhead. For best results make sure the water is warm.
Then sit the cartridge(s) on some moist kitchen roll making sure the bottom on the cartridge (where the ink comes out from) is in contact with the kitchen roll.
Leave the cartridge sitting on the tissue for 20 minutes, and then re-insert the cartridge back into the printer

Now do a few head cleans/Nozzle cleans through the printer software to get the ink flowing

PLEASE NOTE: If, before you refill your cartridge, your cartridge is already printing with streaks, smudges or lines, or if the cartridge's printheads have dried considerably due to non-use, your cartridge is defective or exhibiting signs of defect, and "refilling" it will not bring it back to life. Our Inkjet Refill Kits are intended to refill functional inkjet cartridges. We recommend refilling an inkjet cartridge before it completely empties and while it is still printing well, or very soon after it empties so the printheads don't dry beyond repair.

Answered: I want to buy the brother LC3035 cartridges, but I need to know where they are manufacturedj?

Mon, 15 Mar 2021 18:12:15 +0000

Not necessarily are they all made in China that we sell here as depends on the cartridge# to be remanuactured and most of these systematically inspected, disassembled, cleaned and refilled with 100% new ink which is made in the USA.

We do offer a 1 year warranty on our Compatible cartridges for any quality issues that a customer may face which can be taken care of by the support staff.

Answered: do you have ink cartridges for canon imageprograf pro 300?

Fri, 12 Mar 2021 18:52:04 +0000

This model takes below inks :

Part # PFI-300
Cartridge Colors : Matte Black/ Photo Black/Cyan/Magenta/Yellow/Photo Cyan/Photo Magenta/Gray/Red/Chroma Optimizer

Answered: TN730/760 - Getting an error " No Toner" or " Replace Toner"

Fri, 12 Mar 2021 15:45:53 +0000

The following reset instructions are good for these printer models: Brother DCP-L2550DW, Brother HL-2390dw, Brother MFC-L2710dw

Make sure your printer is on
1. Open front cover of printer (to reveal the cartridge mechanism) and “Front Door Open” will flash on the display.
2. Next, press STOP/EXIT and CLEAR at the SAME TIME (one quick press)
3. Immediately after, press CLEAR once again.
4. A menu called RESET MENU will appear.
5. Arrow down to find your toner type
TNR-STD – use this selection if your toner is standard yield tn-730
TNR-HC – use this selection if your toner is high yield tn-760
6. Once you select the type of toner, PRESS OK
7. Press the UP Arrow to confirm reset
8. The Display should say “Accepted”
9. Close the front cover
Your printer should be ready to print!

Answered: Remove and reinstall ink cartridges error - HP Ink cartridges

Sat, 06 Mar 2021 00:32:10 +0000

Perform a Hard reset on the printer and make sure that the printer is connected directly to the wall outlet and not to the surge protector.

Remove all the ink cartridges and then try to perform a hard reset on the printer.

With the printer turned on, disconnect the power cord from the rear of the printer and also unplug the power cord from the wall outlet.

Remove USB cable, if present.

Wait for 2-3 minutes, press and hold the power button on your printer for about 30 seconds to remove any additional charge.

Now plug back the power cable straight to a wall outlet without any surge protector or an extension cord and then plug back the power cord to the printer.

Turn on the printer and wait till warm-up period finishes and the printer is idle.

Now insert the ink cartridges and then try to print a test page and check if it works.

Answered: my ink is not working

Fri, 26 Feb 2021 15:12:12 +0000

It could be either a bad chip on the cartridge or cartridge not installed properly otherwise might be a case of firmware issues if updated in recent days.

You can email us at support with your order# and also please do mention if you had any recent firmware update on your printer which is NOT recommended in order to use the remanufactured cartridges from any supplier in the market. For more info you can refer to this link below:

http://inklibrary.com/index.php?qa=624&qa_1=can-i-downgrade-the-firmware-on-my-epson-wf-3720

is it just one Magenta that is not working or have you only tried just the Magenta cartridge?

Answered: I enter my pass word and it isn't recognized

Sat, 20 Feb 2021 03:09:00 +0000

Please do not share passwords publicly, but dont worry it was not posted here anyway, nor was your email as emails are not allowed to be posted in the forum. To reset your password pls click on "My Account" from the top menu, then "Forgot my password", it will allow you to reset

How to Fool an HP Deskjet Into Thinking it Has New Ink Cartridges

Tue, 09 Feb 2021 20:02:17 +0000

Credit: By Pamela

With some HP DeskJet printers, you need to fool the printer into thinking you have replaced the old ink cartridge with a new ink cartridge instead of a refilled ink cartridge that you filled yourself. If the printer keeps telling you to replace the ink cartridge or the ink level still reads empty, you can reset the printer so that it will recognize the refilled ink cartridge as new and read the ink level as full, or close to it.

Step 1

Remove the ink cartridge from the printer carriage. Turn the cartridge over so that you are looking at the copper contacts. The contacts should be the closest to you. If the contacts are at the top of the ink cartridge, turn it around so the contacts are closest to you.

Step 2

Place a small piece of clear tape over the seventh copper contact in the second row of contacts from the left side. Place the cartridge back in the printer. Tell the printer to run an alignment. When the alignment is done, remove the cartridge.

Step 3

Keep that piece of tape on the contact. On the right side of the cartridge, in the second row from the right, place a small piece of tape over the sixth copper contact. Place the ink cartridge in the printer. Run an alignment page again.

Remove the ink cartridge when the alignment is done. Remove the tape, making sure to remove the sticky residue when you remove the tape. Place the cartridge in the printer. The printer is ready.

do I chose non Dell toner option for using the remanufactured toners?

Sat, 06 Feb 2021 04:59:21 +0000

do I chose non Dell toner option for using the remanufactured toners?

Printer model Dell E525W

Answered: Does anyone know where to get get original firmware for Epson WF-2860 printer?

Sun, 31 Jan 2021 16:21:19 +0000

The drivers for the Epson WF-2860 printer can be downloaded here:

https://epson.com/Support/Printers/All-In-Ones/WorkForce-Series/Epson-WorkForce-WF-2860/s/SPT_C11CG28201